EPDM granules ETPU granules safey surface system
recommended for contractors and owners.
EPDM Rubber Granules
55lb bag
Poured in Place /wet pour epdm rubber surfacing, using 55lb bags of epdm rubbergranules can be the most cost-effective option for doing large-scale playground.
EPDM granules are used to create the wear layer of poured in place rubber surfacing.
Poured in Place Rubber Surfacing is a unitary surfacing solution that provides a soft cushion around your play set or a running surface for kids to enjoy. It consists of two layers: An impact attenuating layer, the thickness of which is determined by the height of the play equipment. This layer is typically made up of etpu granules which is hyper flex and low weight. The top layer, also called ‘the wear layer’ is the colorful part of the system made up of rubber. It is a two-step process, since the bottom layer needs to cure before the top layer is installed. www.jiadongworld.com
The following are some of the advantages of a poured in place rubber surface:
Needs minimal maintenance.
Is porous, so water does not accumulate on it.
Can embed designs, and logos right in the surface.
Multiple color choices.
No seams.
ADA Compliant.
Can be used as alternative surface to asphalt or Concrete for Trikes.
Can easily be poured in and troweled around existing play equipment.
A good alternative for pitched terrain (where other loose surfacing won’t work that well).
Comments
Post a Comment