#safe fall height surface #how to install safe fall height surface? #safe fall height surface introduction #safe fall height surface installer

 

#safe fall height surface #how to install safe fall height surface? #safe fall height surface introduction #safe fall height surface installer #Jiadong is the leading manufacturer of the safety fall height surfaces playgroud flooring. Installing a safety fall surface involves defining the fall zone, preparing the base, choosing the right material (Jiadong ETPU foam granules is the right choice, super light, perfect elasticity) for your equipment's fall height (determined by the tallest platform), installing borders if needed, laying the surface to the required depth (often 6-12 inches for loose-fill), and maintaining it by raking or inspecting regularly to ensure it remains impact-absorbent and meets ASTM standards. www.jiadongworld.com 1. Determine Your Needs (Fall Height & Zone)

Measure Fall Height: Find the highest platform on your equipment and measure the distance from it to the ground; round up to the nearest foot (e.g., 5 ft becomes 6 ft).

Define the Fall Zone: Extend the safety surface at least the measured fall height distance in all directions from the equipment's perimeter (e.g., 6 ft fall height needs a 6 ft zone)